Dlubal

DLUBAL (09.16) Cross-Section Properties Software  Software

Posted by scutter at Sept. 10, 2016
DLUBAL (09.16) Cross-Section Properties Software

DLUBAL (09.16) Cross-Section Properties Software | 107.6 mb

Dlubal Software has released SHAPE-THIN 7.56.3039 & SHAPE-MASSIVE 6.56.3039. Programs for Cross-Section Properties, Stresses, and Design of Various Cross-Sections.

DLUBAL CRANEWAY 8.06.1103  Software

Posted by scutter at Aug. 29, 2016
DLUBAL CRANEWAY 8.06.1103

DLUBAL CRANEWAY 8.06.1103 | 610.0 mb

Dlubal Software has released 8.06.1103 version of CRANEWAY. This program expands DLUBAL'S product range by the crane runway girder design. Thanks to the well-known user-friendliness of Dlubal programs, you can carry out even complicated analyses according to EN 1993-6, DIN 4132, and DIN 18800 in an easy and comprehensible way.

Dlubal RFEM 5.06  Software

Posted by scutter at July 9, 2016
Dlubal RFEM 5.06

Dlubal RFEM 5.06 | 1.6 Gb

Dlubal Software has released 5.06 version of RFEM is a powerful 3D FEA program helping structural engineers meet requirements in modern civil engineering. Efficient data input and intuitive handling facilitate modeling of simple and large structures.

DLUBAL RX-TIMBER 2.06.1103  Software

Posted by scutter at Sept. 1, 2016
DLUBAL RX-TIMBER 2.06.1103

DLUBAL RX-TIMBER 2.06.1103 | 666.2 mb

Dlubal Software has released 2.06.1103 version of RX-TIMBER is analysis package for Timber Construction with Add-on Modules Glued-Laminated Beam, Continuous Beam and Column.

DLUBAL PLATE-BUCKLING 8.06.1103  Software

Posted by scutter at Aug. 30, 2016
DLUBAL PLATE-BUCKLING 8.06.1103

DLUBAL PLATE-BUCKLING 8.06.1103 | 496.7 mb

Dlubal Software has released 8.06.1103 version of PLATE-BUCKLING. This module performs plate buckling analysis of rectangular plates according to the following standards: EN 1993‑1‑5:2006 and DIN 18800‑3:1990‑11.

DLUBAL Composite-BEAM 8.06.1103  Software

Posted by scutter at Aug. 29, 2016
DLUBAL Composite-BEAM 8.06.1103

DLUBAL Composite-BEAM 8.06.1103 | 542.7 mb

Dlubal Software has released 8.06.1103 version of COMPOSITE-BEAM. This software analyzes continuous composite girders according to Eurocode 4. This add-on module can be used with the RSTAB program or also as an independent module that runs on RSTAB standards.

Dlubal RSTAB 8.06  Software

Posted by scutter at July 8, 2016
Dlubal RSTAB 8.06

Dlubal RSTAB 8.06 | 1.3 Gb

Dlubal Software has released 8.06 version of RSTAB is a powerful analysis and design software for 3D beam, frame, or truss structure calculations, reflecting the current state of the art and helping structural engineers to meet requirements in modern civil engineering.

DLUBAL Craneway 8.01.0022 Multilingual (x86/x64) Repost  Software

Posted by Dizel_ at May 17, 2016
DLUBAL Craneway 8.01.0022 Multilingual (x86/x64) Repost

DLUBAL Craneway 8.01.0022 Multilingual (x86/x64) Repost | 426/429 Mb

Data for the crane girder is entered in the stand-alone program CRANEWAY. For design according to EN 1993-6 it is possible to select the crane type (bridge crane or suspension crane).

DLUBAL RSTAB8 RFEM5 V0119 Multilanguage  

Posted by ph4rr3l at Jan. 7, 2014
DLUBAL RSTAB8 RFEM5 V0119 Multilanguage

DLUBAL RSTAB8 RFEM5 V0119 | 4.47 GB

With the structural engineering program RFEM you can quickly and easily model and calculate 3D and also 2D structures consisting of member (beam), plate, wall, shell and solid elements. The structural analysis and design program RFEM in version 5 has been developed especially for the requirements of international design codes such as American AISC, ACI, Eurocodes, Canadian CS, British BS, Australian AS, Mexican NTC-RCDF, German DIN, Chinese GB, Indian IS and other standards.

Dlubal RSTAB 8.01  Software

Posted by scutter at Sept. 7, 2013
Dlubal RSTAB 8.01

Dlubal RSTAB 8.01 | 1.5 Gb

Dlubal brings the next generation of RSTAB to the market with new version of the structural analysis program, addressing the needs of ambitious structural engineers, with a variety of new useful features.