Lathe

Metal Turning on the Lathe  eBooks & eLearning

Posted by Bayron at April 2, 2016
Metal Turning on the Lathe

Metal Turning on the Lathe by David A. Clark
English | 2014 | ISBN: 1847975232 | 112 pages | EPUB | 18 MB

Rudy Kouhoupt - Advanced Aspects of Machine Lathe Operation [Repost]  eBooks & eLearning

Posted by IrGens at July 10, 2015
Rudy Kouhoupt - Advanced Aspects of Machine Lathe Operation [Repost]

Rudy Kouhoupt - Advanced Aspects of Machine Lathe Operation
DVD5 | VIDEO_TS, NTSC, 3582 kbps, 720x480 | English, AC3, 448 kbps, 2 Ch | 120 mins | 4.49 GB
Subject: Hobby/DIY

Rudy Kouhoupt - Fundamentals of Machine Lathe Operation [Repost]  eBooks & eLearning

Posted by IrGens at July 10, 2015
Rudy Kouhoupt - Fundamentals of Machine Lathe Operation [Repost]

Rudy Kouhoupt - Fundamentals of Machine Lathe Operation
DVD5 | VIDEO_TS, NTSC, 6083 kbps, 720x480 | English, AC3, 384 kbps, 2 Ch | 95 mins | 4.38 GB
Subject: Hobby/DIY

Rudy Kouhoupt - Grinding Lathe Tools [Repost]  eBooks & eLearning

Posted by IrGens at July 1, 2015
Rudy Kouhoupt - Grinding Lathe Tools [Repost]

Rudy Kouhoupt - Grinding Lathe Tools
DVDRip | .AVI, XviD, 979 kbps, 512x384 | English, MP3, 64 kbps, 2 Ch | 112 mins | 874 MB
Genre: DIY

Threading on the Lathe - Tapping on a Lathe (Repost)  eBooks & eLearning

Posted by Polik88 at May 15, 2015
Threading on the Lathe - Tapping on a Lathe (Repost)

Threading on the Lathe - Tapping on a Lathe (Repost)
DVDRip | English | AVI/DivX 23.976 fps 1598 Kbps | 720x544 | MP3 128 Kbps 44.1 khz | 1h 58mn | 1.43 GB
Genre: Video Training

The film is entirely devoted to threading on the lathe.

Lathe Learning - A Five Part Instructional  eBooks & eLearning

Posted by serpmolot at April 29, 2015
Lathe Learning - A Five Part Instructional

Lathe Learning - A Five Part Instructional
5xDVD5 | English | iso | NTSC | MPEG2 720x480 4800 Kbps | AC3 2 ch 256 kbps | 17+ hrs | 17.1 GB
eLearning

Mark Turner Quartet - Lathe Of Heaven (2014) {ECM 2357}  Music

Posted by tiburon at Oct. 27, 2014
Mark Turner Quartet - Lathe Of Heaven (2014) {ECM 2357}

Mark Turner Quartet - Lathe Of Heaven (2014) {ECM 2357}
EAC 1.0b3 | FLAC tracks level 8 | Cue+Log+M3U | Full Scans 600dpi | 695MB + 5% Recovery
Genre: Straight-Ahead Jazz

Mark Turner is one of the most admired saxophonists of his generation, renowned for his exploratory intellect and intimate expressivity on the full range of the tenor. This is his ECM leader debut, following albums for the label in the cooperative trio Fly with Larry Grenadier and Jeff Ballard, and appearances on key recordings by Billy Hart, Enrico Rava and Stefano Bollani. Turner leads a quartet of kindred spirits here, often entwining in serpentine fashion with rising-star trumpeter Avishai Cohen. They play long, introspective lines of hypnotic grace; and with the lithe rhythm section of bassist Joe Martin and drummer Marcus Gilmore, there is subtle volatility in the air.

Basic Taig Micro Lathe Operations with Jose Rodriguez  eBooks & eLearning

Posted by Polik88 at March 21, 2014
Basic Taig Micro Lathe Operations with Jose Rodriguez

Basic Taig Micro Lathe Operations with Jose Rodriguez
DVDRip | English | AVI/XviD 29.970 fps 1200 Kbps | 640x480 | MP3 128 Kbps 44.1 khz | 3h 59mn + 2h 2mn | 3.4 GB
Genre: Video Training, Metalworking

Would you like to be able to see for yourself what can be done on a Taig micro-lathe, with just minimal tooling and expense? Are you somewhat undecided about acquiring one of these small but very capable tools and somehow wished you could just see one being put through its paces before opening your wallet? Well, wait no more! Finally there is a video that will answer most of your basic questions about this lathe.

Advanced Aspects of Machine Lathe Operation [repost]  eBooks & eLearning

Posted by FenixN at Jan. 29, 2013
Advanced Aspects of Machine Lathe Operation [repost]

Advanced Aspects of Machine Lathe Operation
DVD5 | NTSC 4:3 (720x480) VBR | MPEG2 ~4605 kbps | English: AC3, 448 kb/s (2 ch) | Duration: 02:29:39 | 4.36 GB
Genre: Lathe Operation

Rudy's back with two hours worth of excellent advanced techniques for achieving a very high degree of accuracy while boring, turning, facing, threading, milling or grinding on your lathe. He also discusses and demonstrates the most important accessories you will use on your lathe. (2 hours, color).Rudy Kouhoupt was a columnist for "The Home Shop Machinist" and "Live Steam" magazines for 24 years. He also contributed articles and plans to "Popular Mechanics" magazine for more than ten. He was a consummate machinist and a superb teacher. Rudy has always been a proponent of the "Keep it Simple" method of machine and tool design and machining style. You will learn much from his approaches.

Fundamentals of Machine Lathe Operation  eBooks & eLearning

Posted by FenixN at Jan. 29, 2013
Fundamentals of Machine Lathe Operation

Fundamentals of Machine Lathe Operation
DVD5 | NTSC 4:3 (720x480) VBR | MPEG2 ~6584 kbps | English: AC3, 384 kb/s (2 ch) | Duration: 01:32:36 | 4.25 GB
Genre: Lathe Operation

Rudy thoroughly covers the basics of facing, boring and turning on the lathe. Included are plans and directions for a project to practice your skills. He demonstrates on his 1933 9" South Bend lathe. Rudy Kouhoupt was a columnist for "The Home Shop Machinist" and "Live Steam" magazines for 24 years. He also contributed articles and plans to "Popular Mechanics" magazine for more than ten. He was a consummate machinist and a superb teacher. Rudy has always been a proponent of the "Keep it Simple" method of machine and tool design and machining style. You will learn much from his approaches.